19.04.2024
Suspended ceilings are often used to ensure good acoustics in the room and to isolate the transmission of sound from one room to another. At times the space above the visible ceiling is wished to be minimized. Lower space can also minimize the building costs when lower height rooms can be equipped with soundproofed suspended ceilings. To enable this we have developed a new type of acoustic direct hanger solution, which enables extremely low height soundproofed suspended ceilings.
New InfiniSpring® Acoustic Direct Hanger decouple ceilings and cut off noise from around 13 Hz upwards. Figure 1 below shows the new InfiniSpring® Acoustic Direct Hanger 60-7kg (ADH60-7kg) design.
Figure 1. InfiniSpring® – Acoustic Direct Hanger ADH60-7kg
InfiniSpring® Acoustic Direct Hanger 60-7kg is equipped with a 5 mm center hole for the ceiling anchoring. On the lower side InfiniSpring Acoustic Direct Hanger 60-7kg has nail plates to connect to GK60 steel profile or lumber. Nail plates are turned 90-degrees after the anchoring for connecting it. Figure 2 below shows the bent nail plates.
Figure 2. InfiniSpring® – Acoustic Direct Hanger ADH60-7kg with bended nail plates
Designed InfiniSpring® Acoustic Direct Hanger 60-7kg is for nominal loads up to 7 kg. For the overloads the acoustic direct hanger is equipped with integrated movement limiter. As the load increases above 10 kg the movement limiter grounds. InfiniSpring® Acoustic Direct Hanger 60-7kg spring even fits inside the GK60 mm ceiling profile and allows extremely low suspended ceiling heights. Figure 3 below shows the spring inside the profile.
Figure 3. InfiniSpring® – Acoustic Direct Hanger ADH60-7kg fits into the GK60 mm ceiling profile
The new Acoustic Direct Hanger 60-7kg offers high-level acoustic isolation performance, and it is all steel product. A product datasheet is available on our website under the Product page.
InfiniSpring Acoustic Direct Hanger 60-7kg functions perfectly for soundproofing ceilings and even acoustic walls. It is also perfect product for supporting ducts or piping flexibly. In case you have any questions or want to know more please do not hesitate to contact us.
